When you hear that thumpa-thumpa-thumpa sound while driving down the road, you know one of your tires is flat. And that means you'll soon be changing it yourself, if you're not lucky enough to have access to roadside service for your vehicle.

Step 1: Find a Safe Place to Pull Over

Get off the road and as far away from traffic as you can. If you're on a highway and near an exit, take it. The goal is to get off the road entirely and on to solid, level ground—such as a parking lot—where you can use a car jack safely. Failing that, you want to find your way to a road or street with as little traffic as possible, where you can pull off to the side, away from the flow of cars, and be on a spot solid enough to support a jack.

Step 2: Secure Your Vehicle

Make sure the vehicle's engine is off, that it's in park, and that the parking brake is engaged. If you happen to have something that you can use to block a tire (a brick, a piece of wood, or a large rock will do), place it under the tire at the opposite corner of the car from the corner you're going to jack up (e.g., if you're jacking up the right front, block the left rear tire).

Step 3: Locate the Jack and Jacking Points

In most vehicles, the jack is stored in the trunk or in an SUV's wayback, under the cargo-floor cover. After you find it, you need to locate the jacking points on the car's body, where the jack engages. The jacking points for most vehicles are reinforced metal ribs specifically designed to safely lift the vehicle. On most vehicles, there are four jacking points. They're located under the car's rocker panels, just behind the front wheels and just ahead of the rear wheels.

Step 4: Position the Jack

Most car jacks have a slot at the top, on their engagement flange, that slips onto the jack point's reinforced rib—but your car may have a different setup, so check your owner's manual to be sure you understand exactly how your jack works with the jacking point. In the above video, our tech needs to spin the jack down first, so it can fit under the car before he begins jacking it up.

Step 5: Jack Up the Car

Turn the jack handle clockwise slowly until the flat tire comes off the ground. Take your time and make sure that the jack remains positioned straight up and down as it lifts the car. You don't want the jack leaning, because it won't hold the car securely that way. If you're lifting the car to get under it, to do some work, or to change the oil, you must place a jack stand under the rocker panel near the jack and snug it up to the car's body. This will ensure that the car cannot fall on you, should the jack slip or fail entirely.

Step 6: Lower the Car

When you're ready to lower the car, slowly unwind the jack handle in the opposite direction (counterclockwise) until the car's tire is firmly in contact with the ground and you can remove the jack. Return the jack to its storage location, secure it, and you're almost ready to roll. But before you fire up the engine, don't forget to remove whatever you used to block a tire, or you might think the parking brake is stuck on when you try to drive off.