Location:HOME > NEWS > Instructions for High Position Transmission Jack

Instructions for High Position Transmission Jack

2020-04-24 15:11:48   COMMENT:0 HITS:
On February 16, 2020, we received an inquiry from the official website about the high position transmission jack from Côte d'Ivoire. The customers needed 20pcs high position transmission jack.
How to use the high position transmission jack
1.Use a column or scissor lift to lift the car to an appropriate height
2.Push the hydraulic high position transmission jack under the car, and lift the high position transmission jack to a suitable position, remove the items that need to be repaired (such as gearboxes, engines, drive shafts, front and rear axles and other heavy objects not exceeding 100k) At the center of the bracket, then tie it with a steel chain, open the pressure relief valve, and lower the tray and objects to the minimum.
Warning
1. If the high position transmission jack needs to move the object, the bracket should be placed at the lowest position. The ground should be firm and flat. The unevenness and obstacles are not allowed to damage the wheels and the machine.
2. Fasten the object with a steel chain before moving.
3. Overload is strictly prohibited.
4. The high position transmission jack can only be used for objects under 500kg, not for supporting heavy objects such as cars.
5. The oil in the oil storage chamber should be 46 # mechanical oil, and the brake cannot be used instead.

Transmission jack

previous_pageTire Changer and Wheel Balancer
next_pageBusiness Of Truck Tubeless Tire Demount Machine

<ALL>